PVS-69 Monocular Hardware Kit
The PVS-69 by Vonscherf Arms is the industries first consumer level DIY night vision option. Utilizing a 3d printed housing, the PVS-69 Monocular is able to use both standard military Image intensifier units, or for a more affordable route can be fitted with small low light FPV drone cameras for a digital night vision option.
This Hardware kit contains everything you need to assemble the pvs-69 mono, with circuit boards and hardware for use in either digital or analog configurations.
Parts kit contains:
1x Push button switch
1x 1/4-20 Heatset Insert
1x Lower Battery PCB
1x Upper Battery PCB
1x Tube PCB
1x Solid wire strip
1x Battery Spring
1x Pogo Pin
1x 2" Duplex Wire Strip
1x 1/4-20 Thumb Screw
1x Silicone button
2x Leaf Connectors
*You will still need lenses, (pvs14 eye pieces and objective lenses for analog, or pvs 14 eyepieces and 8mm cs lenses for digital) and either mx10160 Image Intensifier Tubes or Cameras and screens*
3d Print Files are available for purchase at Vonscherf Arms
The PVS-69 by Vonscherf Arms is the industries first consumer level DIY night vision option. Utilizing a 3d printed housing, the PVS-69 Monocular is able to use both standard military Image intensifier units, or for a more affordable route can be fitted with small low light FPV drone cameras for a digital night vision option.
This Hardware kit contains everything you need to assemble the pvs-69 mono, with circuit boards and hardware for use in either digital or analog configurations.
Parts kit contains:
1x Push button switch
1x 1/4-20 Heatset Insert
1x Lower Battery PCB
1x Upper Battery PCB
1x Tube PCB
1x Solid wire strip
1x Battery Spring
1x Pogo Pin
1x 2" Duplex Wire Strip
1x 1/4-20 Thumb Screw
1x Silicone button
2x Leaf Connectors
*You will still need lenses, (pvs14 eye pieces and objective lenses for analog, or pvs 14 eyepieces and 8mm cs lenses for digital) and either mx10160 Image Intensifier Tubes or Cameras and screens*
3d Print Files are available for purchase at Vonscherf Arms
The PVS-69 by Vonscherf Arms is the industries first consumer level DIY night vision option. Utilizing a 3d printed housing, the PVS-69 Monocular is able to use both standard military Image intensifier units, or for a more affordable route can be fitted with small low light FPV drone cameras for a digital night vision option.
This Hardware kit contains everything you need to assemble the pvs-69 mono, with circuit boards and hardware for use in either digital or analog configurations.
Parts kit contains:
1x Push button switch
1x 1/4-20 Heatset Insert
1x Lower Battery PCB
1x Upper Battery PCB
1x Tube PCB
1x Solid wire strip
1x Battery Spring
1x Pogo Pin
1x 2" Duplex Wire Strip
1x 1/4-20 Thumb Screw
1x Silicone button
2x Leaf Connectors
*You will still need lenses, (pvs14 eye pieces and objective lenses for analog, or pvs 14 eyepieces and 8mm cs lenses for digital) and either mx10160 Image Intensifier Tubes or Cameras and screens*
3d Print Files are available for purchase at Vonscherf Arms